Categories

Information

List of products by manufacturer Kartell

Kartell uses polypropylene, polystyrene and polyethylene to manufacture many products that are lightweight, highly resistant, inexpensive and the natural alternatives to glass.

per page
Showing 71 - 80 of 116 items
  • Unbreakable vials compatible with all liquid scintillation counters. Heavy walled to minimize solvent losses. Special PP screw cap to achieve leakproof closure (Art. 933). Insert vials, capacity of 4 ml, supplied with screw caps, (Art. 934). Diameter: 13.71mm, Height without cap: 52.50mm, with cap: 53.6mm.

  • HIGH IMPACT PS Light, portable hand operated vacuum pump. Attains a vacuum of 625 mm Hg (25”). Pumping rate is 15 ml per stroke. Built in vacuum release valve. Can be used as pressure pump by transferring release valve cap to vacuumport. Nozzle fits standard 6 mm (1/4”) i.d. tubing.

  • HIGH IMPACT PS Light, portable hand operated vacuum pump. Attains a vacuum of 625 mm Hg (25”). Pumping rate is 15 ml per stroke. Built in vacuum release valve. Can be used as pressure pump by transferring release valve cap to vacuumport. Nozzle fits standard 6 mm (1/4”) i.d. tubing.

  • Clear acrylic resin microscope cover with a square base; protects against dust and dirt. Dimensions  (mm): 300x307x400h

  • For finger print free dispensing of 76x26 mm microscope slides. Up to 50 slides can be put in the magazine. A cover protects the slides from dust. Each slide is dispensed by rotating the knurled knob on either side of the moulded base. Rubber rollers at the sides of the slides ease out the slide which can then be handled by the edges. Material ABS/PS

  • These quick disconnectors are useful for joining hoses of glass, rubber or plastic. Connectors fit tightly together. Replace expensive adapters.

  • Useful interface between filter paper and perforated Buchner plate. Avoids clogging of filter holes. Texture 300 micron (μm). Note: Please indicate cat#, colour and quantity required when requesting a quote.

  • Description Push-in LDPE stoppers for closing cuvettes with square openings (10 x 10 mm) Designed to prevent sample spillage caused by jostling and protection if sample is accidentally overturned.

  • Caps to fit plastic or glass test tubes. Material: PE Plastic. Please indicate  Art# and quantity required when requesting a quote.

  • Stoppers manufactured to DIN Standards 12242 ensuring sealing action on non- standard surfaces. Please indicate cat# and quantity required when requesting a quote.

Showing 71 - 80 of 116 items