Syringe Pumps & Accessories
Syringe Pumps & Accessories There are 50 products.
-
New Era Ana-Box Closed Loop Analog Sensor...
Vary the pumping rate in proportion to a variable voltage input Start or stop pump at set voltages Vary the pumping rate to maintain a voltage window Attaches to any pump in the NE-1000 or NE-9000 Series Click Here For A Detailed Description
-
New Era Dual Valve Control Box
Description: Attach your two 12V DC valves and the control box will open or close your valves according to the pumping directions of your two pumps. Includes CBL-TTL-1 cable to allow synchronized pumping between two pumps. Utilizes the TTL logic ports on both syringe pumps. Includes power supply for valves.
-
New Era Glass Syringes: Standard & Gas Tight
New Era supplies a full range of glass syringes from 50μL to 100mL in gas tight quality and 1mL to 100mL in standard quality. Standard glass can handle between 22 to 43psi while the gas tight can handle from 100psi to upwards of 400psi depending on the syringe.
-
New Era Inert Disposable Syringes
New Era Inert syringes are non-reactive syringes made from polypropylene and polyethylene. Inert syringes do not contain any latex, rubber, silicone oil, styrene or DEHP. (Note: Please indicate syringe Part# and quantity required when requesting a quote)
-
New Era Lockout Mode Disable Key
For use with a syringe or peristaltic pump's Lockout Mode. Prevent unauthorized or accidental changes to the settings by locking the keypad. The Lockout Disable key unlocks the keypad and allows settings to be changed. Attaches to the TTL logic port on the syringe or peristaltic pump. Quick and easy setup.
-
New Era Pump-to-PC Primary Network Cable
Description: Allows full control over syringe pumps through your computer DB-9 adapter connects to 9-pin serial port (25-pin adapters available upon request). Utilizes the RS-232 communications port of syringe pump. Available in 7' and 25' length cable. Quick and simple setup. Also available: NE-BL-PC-PUMP-25 (25 ft. cable).
-
NEW ERA RS-232 Pump Network Secondary...
Allows networking of two or more pumps or other device to a single computer. Quick and simple setup. Utilizes the RS-232 communications port of device. Available in 7' and 25' length cable. Requires first device to be connected with primary network cable.
